Toy Pattern: Necklace-Shamrock

Tools

• Band Saw or Scroll saw
• Sanders – Disc, spindle & belt
• Drill Press with 1/8″ bit
• Sand paper or emery boards 

Material

• 1/8′ to 1/4″ plywood

Instructions

1. Make pattern from print of Shamrock medallion parts by gluing to a piece of cardboard.
2. Tape 4 to 6 layers of 1/8″ to ¼” plywood together and attach pattern on top. 
3. Drill 1/8″ hole for hanging.
4. Cut pattern and wood to shape using saw. Note: cutting four to six pieces at a time makes for smoother edges and speeds up production.
5. On next set of parts draw around pattern on wood surface and mark hole center.
6. Drill 1/8″ hole.
7. Saw shape.
8. Smooth shape with disc or spindle sander.
9. Sand front and back surfaces with a belt sander to smooth and sand edges to remove roughness.

Download pattern here.