Toy Pattern: Witch-Halloween001

Tools

• Scroll saw or Coping Saw
• Electric Drill with 21/64″ bit
• Sand paper
• Scissors or utility knife
• Straight edge

Material

• 3/4″ solid wood or plywood
• 5/16″ dowel
• Brown paper
• Glue

Instructions

1. Make pattern from print of Witch by gluing to a piece of cardboard.
2. Cut pattern to shape.
3. Draw shape on wood surface.
4. Saw Witch from 3/4″ thick solid wood or plywood. Fill any voids with filler.
5. Drill hole for broomstick through wood at angle shown using bit 1/32″ larger than dowel (approx. 21/34″).
6. Cut dowel 4 1/2″ long.
7. Insert and glue dowel.
8. Sand front and back surfaces and edges to remove roughness.
9. Cut broom straw from brown paper as shown above.
10. Use glue to attach to end of dowel.

Download pattern here.