Toy Pattern: Standing Rabbit

Tools

• Band Saw or Scroll saw
• Sanders – Rotary & Band
• Sand paper or emery boards

Material

• 3/8″ Solid Wood or Plywood
• 3/4″ Solid Wood or Plywood
• Wood Filler

Instructions

1. Make patterns from print of rabbit by gluing to a piece of cardboard.
2. Cut patterns to shape.
3. Draw shape on wood surface.
4. Saw body from ¾” thick solid wood or plywood.
5. Fill any voids with filler.
6. Saw 2 x legs and 2 x arms from 3/8″ wood or plywood.
7. Sand cut surfaces with a rotary sander to smooth and sand edges to remove roughness.
8. Rub your hands over the entire vehicle to make sure there are not sharp edges or points. Remove with sandpaper if any are found.

Download pattern: https://slwg.org/wp-content/uploads/2019/06/Standing-Rabbit.jpg