Category: Vehicles

Dedicated to the art of woodworking since 1984.

Toy Pattern: Dump Truck

This toy pattern includes a one page PDF. Please be sure to download and print the attached toy pattern at the bottom of this page along with watching the video instructions. Print full scale or can be enlarged. Dump Truck Tools Band Saw Drill or drill press 7/32” or 9/32” drill bit Material 2 by…
Read more

Toy Pattern: Model T Truck

Tools Band Saw Table Saw Sanders – Orbital and band Drill Press Drill Press Vice or Wooden Handscrew Clamp Drill Bits 1/4″, 5/16″, 3/8″ (5/16″ bit needs to be long enough to cut through 3-3/4″ board Forstner Bit 1″ Hole Saws 1-1/4″m 2″, 2-1/2″ or close to these sizes Small Clamps Glue Sand paper or…
Read more

Toy Pattern: Grader 1

Tools Band Saw or Scroll saw Sanders – Disc, Belt and Orbital Spindle Router with 1/4″ & 1/8″ round-over bits Drill Press Sand paper or emery boards Material 2×4 wood for body 1/2” thick wood for blade 1/4″ & 3/8″ dowels 3/8″ dowel caps 1-1/4″ wheels from the Toy Committee Instructions Make full size patterns…
Read more

Toy Pattern: Grader 2

Tools Band Saw or Scroll saw Sanders – Disc, Belt and Orbital Spindle Router with 1/4″ & 1/8″ round-over bits Drill Press Sand paper or emery boards Material 2×4 wood for body, blade, and engine 5/8″ wood for front axle support 1/4″ wood for engine base, cover and supports 3/8″ dowels 3/8″ dowel caps 7/32″…
Read more

Toy Pattern: Toddler’s Rocking Horse

This toy pattern includes a multi-page PDF. Please be sure to download and print the attached toy pattern at the bottom of this page along with these instructions. Tools Band Saw or Scroll saw Table Saw or Chop Saw Sanders – Disc, Belt and spindle Router with 1/8″ and 1/4″ round over bits Drill Press…
Read more

Toy Pattern: Car 3 Layer

Tools Band Saw or Scroll saw Sanders – Disc, belt and spindle sanders Router with 1/8″ round over bit Drill Press Forstner Bits for large holes Sand paper Material 3/4″ lumber 1-1/4″ wheels ¼” dowel Instructions Make pattern from print of Car by gluing to a piece of cardboard. Cut pattern to shape. Pattern can…
Read more

Toy Pattern: Bandsaw Cars 3

Tools Band Saw or Scroll saw Sanders – Disc, belt and spindle sanders Router with 1/8″ round over bit Drill Press Forstner Bits for large holes Sand paper Material 2″ x 4″ and/or 3/4″ lumber 1-1/4″, 1-1/2″ and 2″ wheels (all with 1/4″ axle holes) ¼” dowel Instructions Make pattern from print of Cars by…
Read more

Toy Pattern: Bandsaw Cars 2

Tools Band Saw or Scroll saw Sanders – Disc, belt and spindle sanders Router with 1/8″ round over bit Drill Press Forstner Bits for large holes Sand paper Material 2″ x 4″ and/or 3/4″ lumber 1-1/4″, 1-1/2″ and 2″ wheels (all with 1/4″ axle holes) ¼” dowel Instructions Make pattern from print of Cars by…
Read more

Toy Pattern: Train Engine

Tools Band Saw or Scroll saw Sanders – Disc, Belt and Spindle Router with 1/8″ round over bit Drill Press Sand paper Material 2″ x 4″ lumber or 6/4 hardwood 3/8″ thick lumber or hardwood ¼”, 1/2″, & 3/4″ dowels 1-1/4″ train wheels with 1/4″ hole or 1-1/2″ train wheels with 5/16″ hole from Toy…
Read more

Toy Pattern: Airplane

Tools Band Saw or Scroll saw Sanders – Orbital and band Router with round-over bit Drill Press Sand paper or emery boards Material 3/8” thick wood for wings & rudder 5/16” thick wood for propeller 3/4″ wood for axle support 1-1/8” thick wood for fuselage clothes pin for pilot 3/16″, 1/4″, & 3/8″ dowels 1-1/4″…
Read more