Toy Pattern: Stacking Blocks

Dedicated to the art of woodworking since 1984.

Print Friendly, PDF & Email

Tools

  • Scroll saw
  • Sanders – Disc, Belt or Spindle
  • Drill Press with 1/4″ bit
  • Sand paper or emery boards 

Material

  • Base: 3/4″ to 1″ lumber
  • Blocks: 3/8″ – 1/2″
  • 1/4″ Dowels

Instructions

  1. Make pattern from print by gluing to a piece of cardboard.
  2. Cut pattern to shape.
  3. Draw shape on wood surface and locate drill center.
  4. Saw item from material.
  5. Smooth edges with disc or spindle sander
  6. Sand to ease rough or sharp edges.
  7. Rub your hands over the entire assembly to make sure there are not sharp edges or points.  Remove with sandpaper if any are found.

Download pattern here. https://slwg.org/wp-content/uploads/2019/06/Stacking-Blocks.png

Leave a Reply