Toy Pattern: Bandsaw Flower 1

Dedicated to the art of woodworking since 1984.

Print Friendly, PDF & Email

Tools

  • Band Saw or Scroll saw
  • Sanders – Disc, belt and spindle sanders
  • Router with 1/8″ or 1/4″ round over bit
  • Sand paper

Material

  • 2″ x 4″ and/or 3/4″ lumber

Instructions

  1. Make pattern from print of Flower by gluing to a piece of cardboard. Cut pattern to shape. Pattern can also be made from mylar or 1/8″ masonite.
  2. Draw shapes on wood surface.
  3. Saw body from 2″ x 4″ or 3/4″ lumber (sand sides smooth). Fill any voids, cracks or knot holes with filler.
  4. Sand curved surfaces with an orbital sander to smooth.
  5. Smooth all sharp edges with a 1/8″ or 1/4″ round over bit .
  6. Rub your hands over the entire flower to make sure there are not sharp edges or points. Remove with sandpaper if any are found.

Download pattern here.

Leave a Reply