Toy Pattern: Necklace-Heart

Dedicated to the art of woodworking since 1984.

Print Friendly, PDF & Email

Tools

  • Band Saw or Scroll saw
  • Sanders – Disc, spindle & belt
  • Drill Press with 1/8″ bit
  • Sand paper or emery boards 

Material

  • 1/8″ to 1/4″ plywood

Instructions

  1. Make pattern from print of Heart by gluing to a piece of cardboard.
  2. Tape 4 to 6 layers of 1/8″ to ¼” plywood together and attach pattern on top.
  3. Drill 1/8″ hole for hanging.
  4. Cut pattern and wood to shape using saw. Note: cutting four to six pieces at a time makes for smoother edges and speeds up production.
  5. Sand outer edge with disc or spindle sander to smooth. Sand both sides smooth.
  6. On next set of parts draw around pattern on wood surface and mark hole center.
  7. Drill 1/8″ hole.
  8. Saw Shape.
  9. Sand outer surface.
  10. Sand front and back surfaces with a belt sander to smooth and sand edges to remove roughness.

Download pattern here.

Leave a Reply